SN74AHC16374DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 16 |
| Clock Frequency | 120MHz |
| Propagation Delay | 18.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 11.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC16374DL Overview
In the form of 48-BSSOP (0.295, 7.50mm Width), it has been packaged. The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. Its output frequency should not exceed 120MHz Hz. The list contains 2 elements. T flip flop consumes 4μA quiescent energy. A total of 48terminations have been recorded. This D latch belongs to the family of 74AHC16374. It is powered from a supply voltage of 3.3V. A JK flip flop with a 2.5pFfarad input capacitance is used here. Electronic devices of this type belong to the AHC/VHC/H/U/Vfamily. Surface Mount mounts this electronic component. It is designed with 48 pins. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. It is designed with 16bits. As soon as 5.5Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be above 2V. A D flip flop with 2embedded ports is available. With an output current of 8mA, this device offers maximum design flexibility. It operates with 3 output lines.
SN74AHC16374DL Features
Tube package
74AHC series
48 pins
16 Bits
SN74AHC16374DL Applications
There are a lot of Texas Instruments SN74AHC16374DL Flip Flops applications.
- Buffer registers
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter
- Computers
- Supports Live Insertion
- ATE
- Data transfer
- Memory
- Matched Rise and Fall
- Reduced system switching noise
