SN74AHC174DGVR
| Parameters | |
|---|---|
| Trigger Type | Positive Edge |
| Input Capacitance | 1.7pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Length | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 180MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
SN74AHC174DGVR Overview
As a result, it is packaged as 16-TFSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). It is configured with Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74AHCseries of FPGAs. Its output frequency should not exceed 180MHz. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. The number of terminations is 16. The 74AHC174 family contains this object. An input voltage of 3.3Vpowers the D latch. This T flip flop has a capacitance of 1.7pF farads at the input. It belongs to the family of electronic devices known as AHC/VHC/H/U/V. This electronic part is mounted in the way of Surface Mount. It is designed with 16 pins. This device's clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There is a 5.5Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. In order to achieve its superior flexibility, 7 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D latch operates on 2/5.5V volts. With a current output of 8mA , it offers maximum design flexibility. Currently, there are 3 input lines present.
SN74AHC174DGVR Features
Tape & Reel (TR) package
74AHC series
16 pins
2/5.5V power supplies
SN74AHC174DGVR Applications
There are a lot of Texas Instruments SN74AHC174DGVR Flip Flops applications.
- High Performance Logic for test systems
- Balanced Propagation Delays
- Safety Clamp
- Automotive
- Frequency Divider circuits
- Common Clocks
- Event Detectors
- Memory
- Computing
- Storage Registers
