SN74AHC174DGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 180MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.7pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Length | 4.4mm |
| RoHS Status | ROHS3 Compliant |
SN74AHC174DGVRE4 Overview
As a result, it is packaged as 16-TFSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. T flip flop is configured with an output of Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~5.5V volts. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. The FPGA belongs to the 74AHC series. You should not exceed 180MHzin the output frequency of the device. A total of 1 elements are present. It consumes 4μA of quiescent In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74AHC174. The D flip flop is powered by a voltage of 3.3V . JK flip flop input capacitance is 1.7pF farads. It is a member of the AHC/VHC/H/U/Vfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. Its superior flexibility is attributed to its use of 7 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The power supply is 2/5.5V. This T flip flop features a maximum design flexibility due to its output current of 8mA. It has 3lines.
SN74AHC174DGVRE4 Features
Tape & Reel (TR) package
74AHC series
16 pins
2/5.5V power supplies
SN74AHC174DGVRE4 Applications
There are a lot of Texas Instruments SN74AHC174DGVRE4 Flip Flops applications.
- Circuit Design
- Latch-up performance
- High Performance Logic for test systems
- Synchronous counter
- ESCC
- Single Up Count-Control Line
- Shift Registers
- Cold spare funcion
- Safety Clamp
- Modulo – n – counter
