SN74AHC174DGVRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 6 |
| Clock Frequency | 180MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.7pF |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Length | 4.4mm |
| RoHS Status | ROHS3 Compliant |
SN74AHC174DGVRG4 Overview
In the form of 16-TFSOP (0.173, 4.40mm Width), it has been packaged. It is included in the package Tape & Reel (TR). It is configured with Non-Invertedas an output. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. Powered by a 2V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74AHCseries of FPGAs. Its output frequency should not exceed 180MHz Hz. A total of 1 elements are present. There is 4μA quiescent consumption. The number of terminations is 16. You can search similar parts based on 74AHC174. The power supply voltage is 3.3V. This T flip flop has a capacitance of 1.7pF farads at the input. Electronic devices of this type belong to the AHC/VHC/H/U/Vfamily. Electronic part Surface Mountis mounted in the way. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. The design is based on 6bits. There is a 5.5Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 2/5.5V power supplies. With a current output of 8mA , it offers maximum design flexibility. There are 6 output lines in this JK flip flop.
SN74AHC174DGVRG4 Features
Tape & Reel (TR) package
74AHC series
16 pins
6 Bits
2/5.5V power supplies
SN74AHC174DGVRG4 Applications
There are a lot of Texas Instruments SN74AHC174DGVRG4 Flip Flops applications.
- Computers
- Common Clocks
- Frequency division
- Buffered Clock
- Differential Individual
- Shift Registers
- Latch
- Supports Live Insertion
- Asynchronous counter
- Digital electronics systems
