SN74AHC174DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 180MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.7pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC174DR Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at 2V~5.5Vvolts. Currently, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. It should not exceed 180MHzin its output frequency. The list contains 1 elements. There is a consumption of 4μAof quiescent energy. 16terminations have occurred. It is a member of the 74AHC174 family. The power source is powered by 3.3V. This JK flip flop has a 1.7pFfarad input capacitance. In this case, the D flip flop belongs to the AHC/VHC/H/U/Vfamily. This electronic part is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchbase part number family. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be above 2V. In order to achieve its superior flexibility, 7 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. The D latch operates on 2/5.5V volts. It offers maximum design flexibility with its output current of 8mA. This input has 3lines in it.
SN74AHC174DR Features
Tape & Reel (TR) package
74AHC series
16 pins
2/5.5V power supplies
SN74AHC174DR Applications
There are a lot of Texas Instruments SN74AHC174DR Flip Flops applications.
- Parallel data storage
- Shift Registers
- Latch-up performance
- Balanced 24 mA output drivers
- Automotive
- Event Detectors
- Load Control
- Counters
- ESD performance
- Instrumentation
