SN74AHC174N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 180MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.7pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC174N Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. It is included in the package Tube. It is configured with Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Through Hole. It operates with a supply voltage of 2V~5.5V. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74AHC series. You should not exceed 180MHzin the output frequency of the device. There are 1 elements in it. As a result, it consumes 4μA of quiescent current without being affected by external factors. A total of 16 terminations have been made. If you search by 74AHC174, you will find similar parts. A voltage of 3.3V is used as the power supply for this D latch. A 1.7pFfarad input capacitance is provided by this T flip flop. AHC/VHC/H/U/Vis the family of this D flip flop. It is mounted in the way of Through Hole. There are 16pins on it. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There is a 5.5Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. To achieve this superior flexibility, 7 circuits are used. An electrical current of 2/5.5V volts is applied to it. Featuring the maximum design flexibility, it has an output current of 8mA . 3input lines are available for you to choose from.
SN74AHC174N Features
Tube package
74AHC series
16 pins
2/5.5V power supplies
SN74AHC174N Applications
There are a lot of Texas Instruments SN74AHC174N Flip Flops applications.
- Communications
- QML qualified product
- EMI reduction circuitry
- Counters
- Parallel data storage
- Matched Rise and Fall
- Pattern generators
- Common Clocks
- Functionally equivalent to the MC10/100EL29
- Power down protection
