SN74AHC174PWR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 180MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.7pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN74AHC174PWR Overview
It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width). The Cut Tape (CT)package contains it. Currently, the output is configured to use Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. A 2V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 180MHz Hz. The element count is 1 . It consumes 4μA of quiescent current without being affected by external factors. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74AHC174 family. The power supply voltage is 3.3V. A 1.7pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of AHC/VHC/H/U/V. There is an electronic part that is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. Normally, the supply voltage (Vsup) should be kept above 2V. Its flexibility is enhanced by 7 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The system runs on a power supply of 2/5.5V watts. With a current output of 8mA , it offers maximum design flexibility. Currently, there are 3 input lines present.
SN74AHC174PWR Features
Cut Tape (CT) package
74AHC series
16 pins
2/5.5V power supplies
SN74AHC174PWR Applications
There are a lot of Texas Instruments SN74AHC174PWR Flip Flops applications.
- Safety Clamp
- Parallel data storage
- Count Modes
- ATE
- QML qualified product
- Single Down Count-Control Line
- Circuit Design
- Computers
- Dynamic threshold performance
- CMOS Process
