SN74AHC273DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 17.1 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC273DBR Overview
The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. The package Cut Tape (CT)contains it. T flip flop uses Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. The 74AHCseries comprises this type of FPGA. A frequency of 110MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. It has been determined that there have been 20 terminations. Members of the 74AHC273family make up this object. It is powered by a voltage of 3.3V . Its input capacitance is 2.5pF farads. Electronic devices of this type belong to the AHC/VHC/H/U/Vfamily. Electronic part Surface Mountis mounted in the way. There are 20pins on it. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 8. Vsup reaches its maximum value at 5.5V. Normal operation requires a supply voltage (Vsup) above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. A total of 2/5.5V power supplies are needed to run it. With a current output of 8mA , it offers maximum design flexibility. This input has 3lines in it.
SN74AHC273DBR Features
Cut Tape (CT) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC273DBR Applications
There are a lot of Texas Instruments SN74AHC273DBR Flip Flops applications.
- Matched Rise and Fall
- Parallel data storage
- QML qualified product
- Frequency Divider circuits
- Data Synchronizers
- Storage registers
- Event Detectors
- Digital electronics systems
- Supports Live Insertion
- Differential Individual
