Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.209, 5.30mm Width) |
Number of Pins |
20 |
Weight |
156.687814mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74AHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
74AHC373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
17 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
1 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2mm |
Length |
7.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHC373DBR Overview
In the 20-SSOP (0.209, 5.30mm Width) package, it is embedded. Cut Tape (CT) is the way it is packaged. It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. It operates at a voltage of 2V~5.5V. During operation, the temperature is set at -40°C~85°C. 74AHC is the series number of this FPGA. There are 8 bits in this electronic part. This device has 20 terminations. The family in which it belongs to is 74AHC373. The supply voltage of the device is 3.3V. 20 pins are provided. This electronic device is categorized as a AHC/VHC/H/U/V electronic device. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. 5.5V is the maximum supply voltage (Vsup). The device is powered by 2/5.5V power supplies. (Vsup) should be greater than 2V. Electronic circuits comprise 3 input lines. The reliability of this device makes it well suited to TR. It consumes 4μA of quiescent current without being affected by external factors. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
SN74AHC373DBR Features
20-SSOP (0.209, 5.30mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC373DBR Applications
There are a lot of Texas Instruments SN74AHC373DBR Latches applications.
- OC-48 communication systems
- Hammer
- Buffer Storage
- A/D converters
- TV Set-top Boxes
- Watches
- Frequency
- Parallel-to-Serial Data Conversion
- Shift left register
- Display driver