SN74AHC373DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 20 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Independent Circuits | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC373DWG4 Overview
In the SOIC package, it is embedded. Rail/Tube is the packaging method. With this electronic part, there are 8 bits. This device has 20 terminations. The supply voltage of the device is 3.3V. 20 pins are available on it. In the world of electronics, this electronic device belongs to the family of AHC/VHC/H/U/V. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. This device is equipped with 2 ports. There is a subcategory of FF/Latches for this part. 8 circuits are used to achieve superior flexibility. It is set to zero for the low level output current. The high level output current is set to -8mA. Ideally, the operating temperature should be lower than 85°C. A temperature greater than -40°C should be used as the operating temperature. The maximum supply voltage is 5.5V. A minimal voltage of 2V is needed to operate it. There is a logic IC that it uses that is a BUS DRIVER. With an output current of 8mA, it is highly flexible in terms of design.
SN74AHC373DWG4 Features
SOIC package
8 Bits
20 pin count
20 pins
SN74AHC373DWG4 Applications
There are a lot of Texas Instruments SN74AHC373DWG4 Latches applications.
- Clocks
- Automotive Infotainment
- Relay
- Automotive ADAS
- Parallel data storage
- Instrumentation
- Ring counter
- Serial Output Data Queuing
- Stacked or Push-Down Registers
- Pattern generators
