Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74AHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
74AHC373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
17 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
1 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHC373DWR Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). As a result, it has a packaging of Tape & Reel (TR). It is configured with an output of Tri-State. This electrical device has Logic type D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. It operates at a voltage of 2V~5.5V. It is -40°C~85°C at the operating temperature. The 74AHC series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74AHC373. The supply voltage of the device is 3.3V. With 20 pins, it is equipped. It is a member of the AHC/VHC/H/U/V family of electronic devices. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. The device is powered by 2/5.5V power supplies. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Electronic circuits comprise 8 input lines. The device's reliable performance makes it a good choice for TR. It consumes 4μA current from its quiescent state without being affected by external factors at all. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
SN74AHC373DWR Features
20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC373DWR Applications
There are a lot of Texas Instruments SN74AHC373DWR Latches applications.
- High-speed logic
- Decade counting 7-segment decimal display
- Relay replacement
- Counter control
- Counters
- General-Purpose Register
- Automotive HEV/EV Powertrain
- Network Switches
- A/D and D/A conversion
- Flip-flops