Parameters |
Count Direction |
UNIDIRECTIONAL |
Height |
5.08mm |
Length |
24.33mm |
Width |
6.35mm |
Thickness |
4.57mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74AHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
2.54mm |
Frequency |
1MHz |
Base Part Number |
74AHC373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
8mA |
Number of Bits |
8 |
Propagation Delay |
9.2 ns |
Turn On Delay Time |
1 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Independent Circuits |
1 |
SN74AHC373N Overview
Package 20-DIP (0.300, 7.62mm) includes it. It is packaged in the way of Tube. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Through Hole. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74AHC series. It is designed with 8 bits. A device such as this has 20 terminations designed. The family it belongs to is 74AHC373. The supply voltage of the device is 3.3V. 20 pins are provided. There is a device in this electronic family called AHC/VHC/H/U/V. In addition, it is designed with a pin number of 20. It is mounted according to the Through Hole method. In this device, there are 2 ports. Subcategory FF/Latches includes this part. There is a maximum voltage supply (Vsup) that reaches 5.5V. The system is powered by 2/5.5V sources. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. It contains 3 input lines where electronic circuits are present. It features maximum flexibility in design due to 8mA output current. In order to operate properly, its maximum power current (ICC) should be 0.04mA.
SN74AHC373N Features
20-DIP (0.300, 7.62mm) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC373N Applications
There are a lot of Texas Instruments SN74AHC373N Latches applications.
- Automatic test equipment
- Counter control
- Sample and hold register
- Address register
- Decade counting 7-segment decimal display
- Ring counter
- Serial Output Data Queuing
- Hammer
- Shift right with parallel loading
- Relay replacement