Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.209, 5.30mm Width) |
Number of Pins |
20 |
Weight |
266.712314mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74AHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74AHC373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
9.2 ns |
Turn On Delay Time |
1 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2mm |
Length |
12.6mm |
Width |
5.3mm |
Thickness |
1.95mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHC373NSR Overview
A package called 20-SOIC (0.209, 5.30mm Width) contains it. A Cut Tape (CT) package is used to package it. In its configuration, Tri-State is used as the output. There is D-Type Transparent Latch logic type for this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 2V~5.5V. The temperature at which the machine is operating is -40°C~85°C. An FPGA in this series belongs to the 74AHC family. An electronic part with 8 bits is designed. As far as this device is concerned, it has no terminations. It belongs to 74AHC373 family. In order to function, the supply voltage should be set to 3.3V. It has 20 pins that makes it easy to use. AHC/VHC/H/U/V is the family of this electronic device. The pin configuration of the device is 20. Surface Mount is used to mount this electronic part. This device has 2 ports that can be connected to it. FF/Latches is the subcategory of this part. 5.5V is the maximum voltage (Vsup) that can be supplied. It operates from 2/5.5V power supplies. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Electronic circuits are represented by 3 input lines. On the basis of its reliability, this device is well suited for TR. The maximal power current (ICC) supplied for its operation reaches 0.04mA.
SN74AHC373NSR Features
20-SOIC (0.209, 5.30mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC373NSR Applications
There are a lot of Texas Instruments SN74AHC373NSR Latches applications.
- Relay replacement
- Shift right register
- Shift left register
- OC-48 communication systems
- Serial Input
- Parallel Input
- Shift left with parallel loading
- Automotive Body Electronics
- Display
- Buffer/Storage Registers