banner_page

SN74AHC373PW

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74AHC Series 74AHC373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHC373PW
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 800
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74AHC Series 74AHC373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AHC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74AHC373
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 2/5.5V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 8mA
Number of Bits 8
Propagation Delay 9.2 ns
Quiescent Current 4μA
Turn On Delay Time 1 ns
Family AHC/VHC/H/U/V
Logic Function D-Type, Latch
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHC373PW Overview


The 20-TSSOP (0.173, 4.40mm Width) package contains it. This package has the format of Tube. There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A 2V~5.5V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. This FPGA is part of the 74AHC series. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. It is a member of the 74AHC373 family. The device works with a voltage of 3.3V for its supply voltage. 20 pins are included. This electronic device is categorized as a AHC/VHC/H/U/V electronic device. It is designed with 20 pins. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. During this period, the maximum supply voltage (Vsup) reaches 5.5V. There are 2/5.5V power supplies attached to it. The supply voltage (Vsup) should be greater than 2V. It consists of 3 input lines from which an electronic circuit can be built. Its 8mA output current allows for maximum design flexibility. The current consumed by the device is 4μA volts in quiescent mode, which cannot be affected by external factors. It achieves superior flexibility by using 8 circuits. In order to operate properly, its maximum power current (ICC) should be 0.04mA.

SN74AHC373PW Features


20-TSSOP (0.173, 4.40mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
2/5.5V power supplies

SN74AHC373PW Applications


There are a lot of Texas Instruments SN74AHC373PW Latches applications.

  • Automotive Body Electronics
  • Stacked or Push-Down Registers
  • Avionics
  • Communication systems
  • Parallel data storage
  • Parallel Input
  • Shift register
  • Motor Drives
  • Counter timers
  • Watches

Write a review

Note: HTML is not translated!
    Bad           Good