SN74AHC373PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC373PWG4 Overview
A package called 20-TSSOP (0.173, 4.40mm Width) contains it. A Tube package is used to package it. It is configured with an output of Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Surface Mount is used to mount this electronic part. The supply voltage of the device is 2V~5.5V. It is -40°C~85°C at the operating temperature. In the 74AHC series, this FPGA is located. An electronic part with 8 bits is designed. This device has 20 terminations. It is a member of the 74AHC373 family. With the supply voltage set at 3.3V, it is able to operate. There are 20 pins attached to it. There is a device in this electronic family called AHC/VHC/H/U/V. With the design of the board, there are only 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. In the subcategory Bus Driver/Transceiver, this part belongs. Vsup reaches 5.5V as the maximum supply voltage. There are 2/5.5V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. Electronic circuits comprise 8 input lines. Aquiescent current is consumed by 4μA without being affected by external forces. The maximal power current (ICC) supplied for its operation reaches 0.04mA.
SN74AHC373PWG4 Features
20-TSSOP (0.173, 4.40mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC373PWG4 Applications
There are a lot of Texas Instruments SN74AHC373PWG4 Latches applications.
- TV Set-top Boxes
- Automotive ADAS
- PCs and Notebooks
- Address register
- Display
- Frequency
- High-speed logic
- Storage
- Parallel Output
- Hammer
