SN74AHC373PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 17 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC373PWR Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. Packaged in the way of Cut Tape (CT). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. A voltage of 2V~5.5V is used as the supply voltage for this device. There is -40°C~85°C operating temperature. The 74AHC series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. This device has been designed with 20 terminations available. This type belongs to the 74AHC373 family. A 3.3V voltage supply is required for operation. The 20 pind are equipped with it. There is a device in this electronic family called AHC/VHC/H/U/V. This board has 20 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. 5.5V is the maximum voltage (Vsup) that can be supplied. There are 2/5.5V power supplies required for this machine to operate. (Vsup) should be greater than 2V. There are electronic circuits attached to the 3 input lines. Based on its reliable performance, this device is appropriate for TR. There are no external factors that affect it, so it consumes 4μA quiescent current. The maximal power current (ICC) supplied for its operation reaches 0.04mA.
SN74AHC373PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC373PWR Applications
There are a lot of Texas Instruments SN74AHC373PWR Latches applications.
- Display driver
- Serial Output Data Queuing
- Accumulator Registers
- Meter applications
- Storage
- Automatic test equipment
- Multi-line decoders
- Parallel data storage
- Automotive Cluster
- Pattern Generators
