SN74AHC373PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -8mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC373PWRE4 Overview
There is an embedded version of it in package TSSOP. A Tape and Reel package is used to package it. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A 3.3V voltage supply is required for operation. It is equipped with 20 pin count. AHC/VHC/H/U/V is the family of this electronic device. The device has 20 pins. Surface Mount is the method used for mounting this electronic part. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. Based on its reliable performance, this device is well suited to TR. The superior flexibility of the system is achieved through its use of 8 circuits. It has been set to 32mA for the low level output current. -8mA represents the high level output current. Ideally, the temperature should not be higher than 85°C. It is recommended that the operating temperature be higher than -40°C. There is a maximum voltage supply of 5.5V that can be applied to it. With a voltage of 2V, it operates at its minimum capacity. A logic IC that is used in this application is BUS DRIVER. As the output current is 8mA, the design flexibility is maximum.
SN74AHC373PWRE4 Features
TSSOP package
8 Bits
20 pin count
20 pins
SN74AHC373PWRE4 Applications
There are a lot of Texas Instruments SN74AHC373PWRE4 Latches applications.
- Up-Down Johnson
- OC-48 communication systems
- Parallel data storage
- Communication systems
- Pseudo-random code generators
- Parallel data synchronization
- Automotive HEV/EV Powertrain
- Counting
- Address register
- Relay replacement
