SN74AHC374DBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 18.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC374DBRG4 Overview
20-SSOP (0.209, 5.30mm Width)is the way it is packaged. A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. This type of FPGA is a part of the 74AHC series. It should not exceed 120MHzin terms of its output frequency. A total of 1elements are present in it. This process consumes 4μA quiescents. There have been 20 terminations. You can search similar parts based on 74AHC374. A voltage of 3.3V provides power to the D latch. Input capacitance of this device is 4pF farads. Electronic devices of this type belong to the AHC/VHC/H/U/Vfamily. It is mounted by the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 8bits in its design. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. To achieve this superior flexibility, 8 circuits are used. In view of its reliability, this D flip flop is a good fit for TR. There are 2/5.5V power supplies attached to it. This D flip flop is equipped with 0 ports. As a result of its output current of 8mA, it is very flexible in terms of design.
SN74AHC374DBRG4 Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC374DBRG4 Applications
There are a lot of Texas Instruments SN74AHC374DBRG4 Flip Flops applications.
- EMI reduction circuitry
- ESCC
- ESD performance
- Computers
- Differential Individual
- Data Synchronizers
- Divide a clock signal by 2 or 4
- Reduced system switching noise
- High Performance Logic for test systems
- Clock pulse
