SN74AHC374DGVR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Supplier Device Package | 20-TVSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~5.5V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 120MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| RoHS Status | ROHS3 Compliant |
SN74AHC374DGVR Overview
The flip flop is packaged in a case of 20-TFSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~5.5Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74AHC series. Its output frequency should not exceed 120MHz. A total of 1 elements are present. There is 4μA quiescent consumption. Its input capacitance is 4pFfarads.
SN74AHC374DGVR Features
Tape & Reel (TR) package
74AHC series
SN74AHC374DGVR Applications
There are a lot of Rochester Electronics, LLC SN74AHC374DGVR Flip Flops applications.
- Shift registers
- Balanced 24 mA output drivers
- Single Down Count-Control Line
- Event Detectors
- Set-reset capability
- Guaranteed simultaneous switching noise level
- Circuit Design
- Bus hold
- Individual Asynchronous Resets
- Divide a clock signal by 2 or 4
