SN74AHC374DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AHC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.2 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AHC374DGVR Overview
20-TFSOP (0.173, 4.40mm Width)is the way it is packaged. It is included in the package Cut Tape (CT). This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. The FPGA belongs to the 74AHC series. A frequency of 120MHzshould be the maximum output frequency. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. It has been determined that there have been 20 terminations. D latch belongs to the 74AHC374 family. An input voltage of 3.3Vpowers the D latch. A JK flip flop with a 4pFfarad input capacitance is used here. An electronic device belonging to the family AHC/VHC/H/U/Vcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 8. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. In light of its reliable performance, this T flip flop is well suited for TR. A total of 2/5.5V power supplies are needed to run it. The D flip flop has no ports embedded. The output current of 8mA makes it feature maximum design flexibility. Currently, there are 3 input lines present.
SN74AHC374DGVR Features
Cut Tape (CT) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC374DGVR Applications
There are a lot of Texas Instruments SN74AHC374DGVR Flip Flops applications.
- Digital electronics systems
- Frequency Divider circuits
- Balanced Propagation Delays
- Latch-up performance
- High Performance Logic for test systems
- Storage registers
- Automotive
- Bus hold
- Functionally equivalent to the MC10/100EL29
- Event Detectors
