Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
129.387224mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Resistance |
75Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74AHC4066 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Number of Channels |
4 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Max Supply Current |
20μA |
Throw Configuration |
SPST |
Propagation Delay |
4 ns |
Turn On Delay Time |
10 ns |
Supply Type |
Single |
Bandwidth |
50MHz |
Turn-Off Delay Time |
16 ns |
On-State Resistance (Max) |
75Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 5.5pF |
On-state Resistance Match-Nom |
6Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
12ns, 12ns |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Crosstalk |
-45dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
25ns |
Switch-off Time-Max |
25ns |
Voltage - Supply, Single (V+) |
2V~5.5V |
Normal Position |
NO |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHC4066D Overview
Presented in 14-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. In total, there are 14 terminations. As a result of its 4 channels, this electronic component provides high-quality output. A 2.3V voltage supply should turn on and run the electronic component. It is part of the design of the 14 series that this electronic component is included. Based on SPST - NO switching circuits, these analog multiplexers work. 74AHC4066 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 75Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2V. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. If you put voltage higher than 20μA on the digital multiplexer, damage may occur. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. In 50MHz-bandwidths, data can be transferred.
SN74AHC4066D Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 50MHz
SN74AHC4066D Applications
There are a lot of Texas Instruments SN74AHC4066D Analog Switches & Multiplexers ICs applications.
- Cable PC
- CSU
- Microwave transmission systems
- High speed data transmission line cards
- Switching Systems
- USB 1.1 signal switching circuits
- Remote Powered Equipment
- Video signal routing
- Channelized and Unchannelized DS3 applications
- Microprocessor Controlled Analog Systems