SN74AHC4066DBR

12ns, 12ns SPST - NO 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74AHC4066 14 Pins 100nA 2.3V 14-SSOP (0.209, 5.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AHC4066DBR
Package: 14-SSOP (0.209, 5.30mm Width)
Datasheet: -
Stock: 729
Description: 12ns, 12ns SPST - NO 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74AHC4066 14 Pins 100nA 2.3V 14-SSOP (0.209, 5.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SSOP (0.209, 5.30mm Width)
Number of Pins	14
Weight	121.789551mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	75Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74AHC4066
Output	SEPARATE OUTPUT
Pin Count	14
Qualification Status	Not Qualified
Power Supplies	2.5/5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Max Supply Current	20μA
Throw Configuration	SPST
Propagation Delay	4 ns
Turn On Delay Time	25 ns
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 5.5pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	12ns, 12ns
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-45dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Height	2mm
Length	6.2mm
Width	5.3mm
Thickness	1.95mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AHC4066DBR Overview

Shipping overseas is convenient with the electronic component packed in 14-SSOP (0.209, 5.30mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 14 terminations have occurred. By its 4 channels, the electronic component provides high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. The electrical component body receives 14 pins. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching with 74AHC4066 if you're looking for variants. Analog switches have 75Ohm internal resistance. To find out what the functions of 14 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage that should be fed to the electronic electronic part. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 20μA on the multiplexer to cause damage. This analog switch ic utilizes SEPARATE OUTPUT output. In 50MHz-bandwidths, data can be transferred.