SN74AHC4066DG4

12ns, 12ns SPST - NO 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74AHC4066 14 Pins 100nA 2.3V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AHC4066DG4
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 928
Description: 12ns, 12ns SPST - NO 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74AHC4066 14 Pins 100nA 2.3V 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	129.387224mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	75Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.3V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74AHC4066
Output	SEPARATE OUTPUT
Pin Count	14
Qualification Status	Not Qualified
Power Supplies	2.5/5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Max Supply Current	20μA
Throw Configuration	SPST
Propagation Delay	4 ns
Turn On Delay Time	25 ns
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 5.5pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	12ns, 12ns
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-45dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AHC4066DG4 Overview

This electronic part is conveniently packaged in 14-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, there have been 14 terminations. Due to its 4 channels, the electrical component produces high-quality output. A 2.3V voltage supply should turn on and run the electronic component. As part of its design, the 14 series is equipped with this electronic component. Based on SPST - NO switching circuits, these analog multiplexers work. Use 74AHC4066 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 75Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage the electrical component should receive. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. If put voltage greater than 20μA on the device, damage may be caused to the analogue multiplexer. There are SEPARATE OUTPUT outputs on this analog switch ic. 50MHz-bandwidths can be used to transfer data between multiplexers.