SN74AHC4066DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 41.787197mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Max Supply Current | 20μA |
| Throw Configuration | SPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 25 ns |
| Supply Type | Single |
| Bandwidth | 50MHz |
| Turn-Off Delay Time | 25 ns |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 5.5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 12ns, 12ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -45dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC4066DGVR Overview
Presented in 14-TFSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Cut Tape (CT). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 14 terminations have occurred. As a result of its 4 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 2.3V, it should be turned on and run. There are 14 pins injected into the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. Using the 74AHC4066 search parameter, you can discover variants of the switch. A 75Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 14 pins are available. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 20μA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. There are various bandwidths available for data transfer.
SN74AHC4066DGVR Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 50MHz
SN74AHC4066DGVR Applications
There are a lot of Texas Instruments SN74AHC4066DGVR Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Frame Relay Equipment
- Fault Tolerant Systems
- PCMCIA cards
- Wireless Local Loop
- Automatic test equipment
- Sample-and-hold systems
- Medical systems
- RGB switches
- Private Branch Exchange (PBX)
