SN74AHC540N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74AHC540 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | 3-State |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 17.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Buffer, Inverting |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC540N Overview
Logical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 2V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74AHC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Electronic parts from the AHC/VHC/H/U/V family are used in this part. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74AHC540" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 2/5.5V power supply. To supply the device, a minimum voltage of 2V is a must. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. It is sufficient to make 8 outputs.
SN74AHC540N Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
SN74AHC540N Applications
There are a lot of Texas Instruments SN74AHC540N Buffers & Transceivers applications.
- High-speed computer links
- Wireless HD Photography
- Cell phones
- Wireless interactive experience
- Structural bonding
- Pocket PC
- Shortwave receiver
- Point-to-point networking
- Military satellite communications
- Wireless communication
