SN74AHC573DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 17.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC573DBR Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. This package has the format of Cut Tape (CT). In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Surface Mount method. It operates at a voltage of 2V~5.5V. During operation, the temperature is set at -40°C~85°C. In the 74AHC series, this FPGA is located. It is designed with 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74AHC573. In order to operate it, the supply voltage must be 3.3V. With 20 pins, it is equipped. In terms of electronic devices, this one is in the AHC/VHC/H/U/V family. The pin configuration of the device is 20. Mounting this electronic component follows the Surface Mount method. This device has 2 ports. There is a subcategory of FF/Latches for this part. During this period, the maximum supply voltage (Vsup) reaches 5.5V. There are 2/5.5V power supplies attached to it. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Electronic circuits comprise 3 input lines. Based on its reliable performance, this device is suitable for TR. Maximum power supply (ICC) for its operation is 0.04mA.
SN74AHC573DBR Features
20-SSOP (0.209, 5.30mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC573DBR Applications
There are a lot of Texas Instruments SN74AHC573DBR Latches applications.
- Automotive ADAS
- Counter timers
- Parallel Output
- Programmable binary
- Parallel data storage
- Counting
- Parallel Input
- Decade counting 7-segment decimal display
- Motor Drives
- Pattern Generators
