Parameters |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
20 |
Weight |
156.687814mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Additional Feature |
BROADSIDE VERSION OF 373 |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Pin Count |
20 |
Polarity |
Non-Inverting |
Temperature Grade |
AUTOMOTIVE |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
8mA |
Number of Bits |
8 |
Propagation Delay |
8.8 ns |
Turn On Delay Time |
1 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-8mA |
Low Level Output Current |
8mA |
Independent Circuits |
1 |
Height |
1.95mm |
Length |
7.2mm |
Width |
5.3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74AHC573DBRG4 Overview
In the SSOP package, it is embedded. Tape and Reel is the way in which it is packaged. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations. The device is operated when the supply voltage is set to 3.3V. 20 pins are included. It is a member of the AHC/VHC/H/U/V family of electronic devices. With the design of the board, there are only 20 pins. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. 8 circuits are used to achieve superior flexibility. It also has characteristics of BROADSIDE VERSION OF 373. 8mA is the low level output current. There is -8mA output current at the high level. It is recommended to work at a temperature lower than 125°C. Temperatures above -40°C should be used. It is capable of providing a maximum supply voltage of 5.5V. A voltage of 2V is the minimum supply voltage required for it to operate. BUS DRIVER is the logic IC it uses. It features maximum flexibility in design due to 8mA output current.
SN74AHC573DBRG4 Features
SSOP package
8 Bits
20 pin count
20 pins
SN74AHC573DBRG4 Applications
There are a lot of Texas Instruments SN74AHC573DBRG4 Latches applications.
- Counter timers
- Pattern generators
- Synchronous frequency dividers
- Network Switches
- Hammer
- Programmable binary
- Ring counter
- Counters
- Up-Down Johnson
- Shift right with parallel loading