SN74AHC573DGVR
| Parameters | |
|---|---|
| Number of Bits | 8 |
| Propagation Delay | 17.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Ambient Temperature Range High | 125°C |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AHC573 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
SN74AHC573DGVR Overview
The package in which it is embedded is named 20-TFSOP (0.173, 4.40mm Width). Cut Tape (CT) is the packaging method. There is a Tri-State output configured. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 2V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. An FPGA of this type belongs to the 74AHC series. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74AHC573. With the supply voltage set at 3.3V, it is able to operate. It has 20 pins that makes it easy to use. It is a member of the AHC/VHC/H/U/V family of electronic devices. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. Vsup reaches 5.5V as the maximum supply voltage. The system is powered by 2/5.5V sources. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. It consists of 3 input lines from which an electronic circuit can be built. On the basis of its reliability, this device is well suited for TR. It consumes 4μA of quiescent current without being affected by external factors. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.
SN74AHC573DGVR Features
20-TFSOP (0.173, 4.40mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC573DGVR Applications
There are a lot of Texas Instruments SN74AHC573DGVR Latches applications.
- Avionics
- Automatic test equipment
- Decade counting 7-segment decimal display
- General-Purpose Register
- Registers
- Phase comparator
- Automotive Infotainment
- A/D converters
- Storage
- Shift right register
