SN74AHC573DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 2.5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 17.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC573DW Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. As a result, it has a packaging of Tube. Tri-State is the output configured for it. This electrical device has Logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74AHC series. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. This type belongs to the 74AHC573 family. The device works with a voltage of 3.3V for its supply voltage. 20 pins are included. This electronic device is categorized as a AHC/VHC/H/U/V electronic device. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. 2 ports are available on this device. Subcategory Bus Driver/Transceiver includes this part. Vsup reaches 5.5V as the maximum supply voltage. The device is powered by 2/5.5V power supplies. Ensure that the supply voltage (Vsup) is greater than 2V. There are 3 input lines in which electronic circuits are present. With an output current of 8mA, it is highly flexible in terms of design. High efficiency requires maintaining the supply voltage at 2.5V. It consumes 4μA of quiescent current without being affected by outside factors. In order to achieve its superior flexibility, 8 circuits are used. The maximal power current (ICC) supplied for its operation reaches 0.04mA.
SN74AHC573DW Features
20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC573DW Applications
There are a lot of Texas Instruments SN74AHC573DW Latches applications.
- Sample and hold register
- A/D and D/A conversion
- Buffer register
- Serial Output Register
- Up-Down Johnson
- Bus system register with enable parallel lines at bus side
- Double bus register system
- Watches
- Display
- Digital bus buffer
