banner_page

SN74AHC573DWG4

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74AHC Series 74AHC573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHC573DWG4
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 843
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74AHC Series 74AHC573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AHC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature BROADSIDE VERSION OF 373
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number 74AHC573
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 2/5.5V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 8mA
Number of Bits 8
Propagation Delay 17.5 ns
Turn On Delay Time 1 ns
Family AHC/VHC/H/U/V
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHC573DWG4 Overview


The 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the way in which it is packaged. The output it is configured with uses Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A 2V~5.5V supply voltage is required to operate it. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74AHC family. Electronic parts with 8 bits are designed for this application. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is no doubt that it belongs to the family 74AHC573. With the supply voltage set at 3.3V, it is able to operate. With 20 pins, it is equipped. This electronic device is categorized as a AHC/VHC/H/U/V electronic device. This board has 20 pins on it, which is what it is designed for. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. Subcategory FF/Latches contains this part. 5.5V is the maximum voltage (Vsup) that can be supplied. It operates from 2/5.5V power supplies. Ensure that the supply voltage (Vsup) is greater than 2V. Input Lines consist of electronic circuits, and there are 8. Due to its 8mA output current, it offers maximum design flexibility. There are also other characteristics of it, such as BROADSIDE VERSION OF 373. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.

SN74AHC573DWG4 Features


20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies

SN74AHC573DWG4 Applications


There are a lot of Texas Instruments SN74AHC573DWG4 Latches applications.

  • Network Switches
  • Lamp and Display (LED)
  • Shift register
  • Parallel data synchronization
  • Avionics
  • Storage
  • Parallel-to-Serial Data Conversion
  • A/D and D/A conversion
  • Frequency
  • Double bus register system

Write a review

Note: HTML is not translated!
    Bad           Good