SN74AHC573DWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 17.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC573DWRE4 Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. As a result, it has a packaging of Tape & Reel (TR). It is configured with an output of Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The voltage supply is 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74AHC family. 8 Bits are used in the design of this electronic part. A device with this design has 20 terminations. It is a member of the 74AHC573 family. The device works with a voltage of 3.3V for its supply voltage. 20 pins are available on it. AHC/VHC/H/U/V is the family of this electronic device. It is designed with 20 pins. This electronic part is mounted in the way of Surface Mount. This device has 2 ports on board, which are all available at the same time. The part belongs to the FF/Latches subcategory. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. There are 2/5.5V power supplies required for this machine to operate. A voltage greater than 2V must be supplied as a power supply (Vsup). It consists of 8 input lines from which an electronic circuit can be built. On the basis of its reliability, this device is well suited for TR. With an output current of 8mA, it is highly flexible in terms of design. There is also BROADSIDE VERSION OF 373 characteristics to it. Maximum power supply (ICC) for its operation is 0.04mA.
SN74AHC573DWRE4 Features
20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC573DWRE4 Applications
There are a lot of Texas Instruments SN74AHC573DWRE4 Latches applications.
- Audio and video switching
- TV Set-top Boxes
- Up/down difference counting
- Shift left register
- Avionics
- Counter control
- Automatic test equipment
- Serial Output Data Queuing
- Lamp and Display (LED)
- Control circuits
