SN74AHC573DWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC573DWRG4 Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tape & Reel (TR) is the way in which it is packaged. In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 2V~5.5V voltage supply is required for operation. It is -40°C~85°C at the operating temperature. The 74AHC series contains FPGAs of this type. 8 Bits are used in the design of this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. This type belongs to the 74AHC573 family. The supply voltage of the device is 3.3V. With 20 pins, it is equipped. In terms of electronic devices, this one is in the AHC/VHC/H/U/V family. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. During this period, the maximum supply voltage (Vsup) reaches 5.5V. It operates from 2/5.5V power supplies. A supply voltage (Vsup) greater than 2V is required. An electronic circuit can be found on 8 input lines. This device is well suited for TR based on its reliable performance. The 8mA output current gives it maximum design flexibility. In addition, BROADSIDE VERSION OF 373 characterize it. The maximal power current (ICC) supplied for its operation reaches 0.04mA.
SN74AHC573DWRG4 Features
20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC573DWRG4 Applications
There are a lot of Texas Instruments SN74AHC573DWRG4 Latches applications.
- Frequency dividing
- Automotive Infotainment
- Parallel Input
- Multistage ripple counting
- Communication systems
- Sample and hold register
- Decade counting 7-segment decimal display
- Counters
- Shift left register
- Counter
