Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74AHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceiver |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
2.54mm |
Frequency |
1MHz |
Base Part Number |
74AHC573 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
8mA |
Number of Bits |
8 |
Propagation Delay |
17.5 ns |
Turn On Delay Time |
1 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
5.08mm |
Length |
24.33mm |
Width |
6.35mm |
Thickness |
4.57mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHC573N Overview
Package 20-DIP (0.300, 7.62mm) includes it. Tube is the way it is packaged. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. 74AHC is the series number of this FPGA. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. The family in which it belongs to is 74AHC573. In order to function, the supply voltage should be set to 3.3V. It has 20 pins that makes it easy to use. AHC/VHC/H/U/V is the family name of this electronic device. 20 pins are used in its design. Through Hole is the way in which this electronic part is mounted. This device has 2 ports. In the subcategory Bus Driver/Transceiver, this part belongs. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. 2/5.5V power supplies are needed to operate it. (Vsup) should be greater than 2V. An electronic circuit can be found on 3 input lines. With 8mA, maximum design flexibility is ensured. In order to achieve its superior flexibility, 8 circuits are used. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.
SN74AHC573N Features
20-DIP (0.300, 7.62mm) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC573N Applications
There are a lot of Texas Instruments SN74AHC573N Latches applications.
- OC-48 communication systems
- Shift left with parallel loading
- Parallel data storage
- Storage
- Up/down difference counting
- Shift Registers
- Automotive Body Electronics
- Communication systems
- Meter applications
- Multistage ripple counting