banner_page

SN74AHC573NSR

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74AHC Series 74AHC573 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHC573NSR
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 760
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74AHC Series 74AHC573 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Weight 266.712314mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74AHC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Additional Feature BROADSIDE VERSION OF 373
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number 74AHC573
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 2/5.5V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 17.5 ns
Quiescent Current 4μA
Turn On Delay Time 1 ns
Family AHC/VHC/H/U/V
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2mm
Length 12.6mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHC573NSR Overview


20-SOIC (0.209, 5.30mm Width) contains it. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. In the 74AHC series, this FPGA is located. Electronic parts with 8 bits are designed for this application. As far as this device is concerned, it has no terminations. This type belongs to the 74AHC573 family. In order to operate it, the supply voltage must be 3.3V. There are 20 pins attached to it. This electronic device is categorized as a AHC/VHC/H/U/V electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. This device has 2 ports. There is a subcategory of FF/Latches for this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. A total of 2/5.5V power supplies are required for it to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. It contains 8 input lines where electronic circuits are present. The reliability of this device makes it well suited to TR. Aquiescent current is consumed by 4μA without being affected by external forces. In addition, BROADSIDE VERSION OF 373 characterize it. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.

SN74AHC573NSR Features


20-SOIC (0.209, 5.30mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies

SN74AHC573NSR Applications


There are a lot of Texas Instruments SN74AHC573NSR Latches applications.

  • Relay
  • Network Switches
  • TV Set-top Boxes
  • Automotive Cluster
  • Parallel data synchronization
  • Parallel Input
  • Serial Output Data Queuing
  • Shift register
  • Multi-line decoders
  • Counter timers

Write a review

Note: HTML is not translated!
    Bad           Good