banner_page

SN74AHC573PWR

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74AHC Series 74AHC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHC573PWR
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 922
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74AHC Series 74AHC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74AHC
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Bus Driver/Transceiver
Packing Method TR
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number 74AHC573
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 2/5.5V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 25mA
Number of Bits 8
Propagation Delay 17.5 ns
Quiescent Current 4μA
Turn On Delay Time 1 ns
Family AHC/VHC/H/U/V
Logic Function D-Type, Latch
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHC573PWR Overview


A package called 20-TSSOP (0.173, 4.40mm Width) contains it. Cut Tape (CT) is the packaging method. It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. With a supply voltage of 2V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. In the 74AHC series, this FPGA is located. 8 Bits are used in the design of this electronic part. A device such as this has 20 terminations designed. 74AHC573 is the family name of it. The device works with a voltage of 3.3V for its supply voltage. 20 pins are available on it. This electronic device belongs to the family of AHC/VHC/H/U/V. 20 pins are used in its design. Surface Mount is the method used for mounting this electronic part. This device has 2 ports. Subcategory Bus Driver/Transceiver contains this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. A total of 2/5.5V power supplies are required for it to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. An electronic circuit can be found on 3 input lines. Based on its reliable performance, this device is appropriate for TR. It features maximum flexibility in design due to 25mA output current. There are no external factors that affect it, so it consumes 4μA quiescent current. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.

SN74AHC573PWR Features


20-TSSOP (0.173, 4.40mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies

SN74AHC573PWR Applications


There are a lot of Texas Instruments SN74AHC573PWR Latches applications.

  • Frequency
  • Serial Output Register
  • Control circuits
  • Parallel data storage
  • Avionics
  • Watches
  • Lamp and Display (LED)
  • Meter applications
  • Buffer/Storage Registers
  • Sample and hold register

Write a review

Note: HTML is not translated!
    Bad           Good