Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, 74AHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74AHC573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
4μA |
Number of Bits |
8 |
Propagation Delay |
8.8 ns |
Turn On Delay Time |
1 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW/HIGH |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Translation |
N/A |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHC573QPWRG4Q1 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the packaging method. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A 2V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. In the Automotive, AEC-Q100, 74AHC series, this FPGA is located. This electronic part is designed with 8 Bits. A device with this design has 20 terminations. As a member of the 74AHC573 family, it falls under that category. With the supply voltage set at 3.3V, it is able to operate. It is equipped with 20 pin count. It is part of the family of electronic devices called AHC/VHC/H/U/V. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. During this period, the maximum supply voltage (Vsup) reaches 5.5V. A total of 2/5.5V power supplies are required for it to operate. The supply voltage (Vsup) should be greater than 2V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The reliability of this device makes it well suited to TR. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74AHC573QPWRG4Q1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC573QPWRG4Q1 Applications
There are a lot of Texas Instruments SN74AHC573QPWRG4Q1 Latches applications.
- Parallel data synchronization
- Parallel Input
- Clocks
- Up-Down Johnson
- A/D and D/A conversion
- Frequency
- Pattern Generators
- Synchronous frequency dividers
- TV Set-top Boxes
- Pattern generators