SN74AHC573QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.600411mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 8 |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC573QPWRQ1 Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. It is packaged in the way of Tape & Reel (TR). The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 2V~5.5V. There is a temperature of -40°C~85°C at which the system operates. The Automotive, AEC-Q100, 74AHC series contains FPGAs of this type. There are 8 bits in this electronic part. A device with this design has 20 terminations. The family it belongs to is 74AHC573. The device works with a voltage of 3.3V for its supply voltage. 20 pins are provided. In terms of electronic devices, this one is in the AHC family. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.5V. A total of 2/5.5V power supplies are required for it to operate. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. Based on its reliable performance, this device is suitable for TR. The binary equivalent of the input line is generated by 8 output lines. It consists of 1 elements. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.
SN74AHC573QPWRQ1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies
1 elements
SN74AHC573QPWRQ1 Applications
There are a lot of Texas Instruments SN74AHC573QPWRQ1 Latches applications.
- Up-Down Johnson
- OC-48 communication systems
- Four-bit storage with output enable
- Instrumentation
- Hammer Device Information
- Meter applications
- Multistage ripple counting
- Counter timers
- Serial Output Register
- Parallel Output
