SN74AHC574NSR

2V~5.5V 115MHz 8 Bit D-Type Flip Flop DUAL 74AHC574 20 Pins 4μA 74AHC Series 20-SOIC (0.209, 5.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AHC574NSR
Package: 20-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 985
Description: 2V~5.5V 115MHz 8 Bit D-Type Flip Flop DUAL 74AHC574 20 Pins 4μA 74AHC Series 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.209, 5.30mm Width)
Number of Pins	20
Weight	266.712314mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	74AHC
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Type	D-Type
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	FF/Latches
Packing Method	TR
Technology	CMOS
Voltage - Supply	2V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74AHC574
Function	Standard
Qualification Status	Not Qualified
Output Type	Tri-State, Non-Inverted
Number of Elements	1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	2/5.5V
Supply Voltage-Min (Vsup)	2V
Number of Circuits	8
Load Capacitance	50pF
Number of Ports	2
Output Current	8mA
Number of Bits	8
Clock Frequency	115MHz
Propagation Delay	16.7 ns
Turn On Delay Time	1 ns
Family	AHC/VHC/H/U/V
Logic Function	D-Type, Flip-Flop
Current - Quiescent (Iq)	4μA
Current - Output High, Low	8mA 8mA
Max Propagation Delay @ V, Max CL	10.6ns @ 5V, 50pF
Trigger Type	Positive Edge
Input Capacitance	3pF
Power Supply Current-Max (ICC)	0.04mA
Number of Input Lines	3
Count Direction	UNIDIRECTIONAL
Clock Edge Trigger Type	Positive Edge
Max Frequency@Nom-Sup	75000000Hz
Height	2mm
Length	12.6mm
Width	5.3mm
Thickness	1.95mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AHC574NSR Overview

The flip flop is packaged in 20-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. It is operating at a temperature of -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74AHCseries of FPGAs. It should not exceed 115MHzin terms of its output frequency. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. A total of 20 terminations have been made. This D latch belongs to the family of 74AHC574. The power source is powered by 3.3V. This JK flip flop has a 3pFfarad input capacitance. In terms of electronic devices, this device belongs to the AHC/VHC/H/U/Vfamily of devices. The electronic part is mounted in the way of Surface Mount. There are 20pins on it. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. Vsup reaches 5.5V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its superior flexibility is attributed to its use of 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The system runs on a power supply of 2/5.5V watts. A total of 2ports are embedded in the D flip flop. It offers maximum design flexibility with its output current of 8mA. Currently, there are 3 input lines present.