SN74AHC574PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC574PW Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. A package named Tubeincludes it. T flip flop is configured with an output of Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 115MHz Hz. D latch consists of 1 elements. T flip flop consumes 4μA quiescent energy. The number of terminations is 20. You can search similar parts based on 74AHC574. A voltage of 3.3V is used as the power supply for this D latch. A JK flip flop with a 3pFfarad input capacitance is used here. Devices in the AHC/VHC/H/U/Vfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. Vsup reaches 5.5V, the maximal supply voltage. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. 8 circuits are used to achieve its superior flexibility. The D latch operates on 2/5.5V volts. This flip flop has a total of 2ports. With an output current of 8mA, it is possible to design the device in any way you want. A total of 3input lines have been provided.
SN74AHC574PW Features
Tube package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC574PW Applications
There are a lot of Texas Instruments SN74AHC574PW Flip Flops applications.
- Asynchronous counter
- Dynamic threshold performance
- Single Up Count-Control Line
- Storage Registers
- Individual Asynchronous Resets
- Synchronous counter
- Load Control
- Memory
- Buffered Clock
- Functionally equivalent to the MC10/100EL29
