SN74AHC74DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC74DBR Overview
It is embeded in 14-SSOP (0.209, 5.30mm Width) case. You can find it in the Cut Tape (CT)package. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. Powered by a 2V~5.5Vvolt supply, it operates as follows. -40°C~125°C TAis the operating temperature. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74AHCseries of FPGAs. It should not exceed 115MHzin terms of its output frequency. 14terminations have occurred. Members of the 74AHC74family make up this object. The power supply voltage is 3.3V. JK flip flop input capacitance is 2pF farads. It is a member of the AHC/VHC/H/U/Vfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in FF/Latches. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be maintained above 2V for normal operation. To achieve this superior flexibility, 2 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. Featuring the maximum design flexibility, it has an output current of 8mA . It has 4lines. In terms of quiescent current, it consumes 2μA .
SN74AHC74DBR Features
Cut Tape (CT) package
74AHC series
14 pins
SN74AHC74DBR Applications
There are a lot of Texas Instruments SN74AHC74DBR Flip Flops applications.
- Counters
- Balanced 24 mA output drivers
- Modulo – n – counter
- Frequency Divider circuits
- Computing
- Automotive
- Cold spare funcion
- Test & Measurement
- Frequency Dividers
- Buffer registers
