SN74AHC74DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Frequency | 115MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 8mA |
| Number of Bits | 1 |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.008 A |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC74DG4 Overview
SOICis the way it is packaged. A total of 2elements are contained within it. Currently, there are 14 terminations. A voltage of 3.3V is used to power it. The electronic device belongs to the AHC/VHC/H/U/Vfamily. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. The flip flop is designed with 1bits. In view of its reliability, this D flip flop is a good fit for TUBE. A total of 1input lines have been provided. In this case, the high level output current is set to -8mA. A 8mAvalue is set for low-level output current. Ideally, the operating temperature should be below 125°C. Ideally, the operating temperature should be greater than -40°C. The system operates with a minimum supply voltage of 2V. 5.5Vis the maximum supply voltage it supports. It is possible to achieve 115MHz frequencies. It uses a logic IC with a D FLIP-FLOP value. It is equipped with 2 Functions . This device is equipped with a pin count of 14. As a result of its output current of 8mA, it is very flexible in terms of design.
SN74AHC74DG4 Features
14 pins
1 Bits
2 Functions
14 pin count
SN74AHC74DG4 Applications
There are a lot of Texas Instruments SN74AHC74DG4 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- ATE
- EMI reduction circuitry
- Frequency Dividers
- Bus hold
- ESCC
- Load Control
- Frequency division
- Shift Registers
- Memory
