SN74AHC74DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 41.787197mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC74DGVR Overview
The flip flop is packaged in 14-TFSOP (0.173, 4.40mm Width). There is an embedded version in the package Cut Tape (CT). Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 2V~5.5Vvolts. Currently, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74AHC series. It should not exceed 115MHzin terms of its output frequency. During its operation, it consumes 2μA quiescent energy. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74AHC74family make up this object. A voltage of 3.3V is used to power it. Input capacitance of this device is 2pF farads. The electronic device belongs to the AHC/VHC/H/U/Vfamily. Electronic part Surface Mountis mounted in the way. It is designed with 14 pins. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latch. Vsup reaches 5.5V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. The superior flexibility of this product is achieved by using 2 circuits. Considering its reliability, this T flip flop is well suited for TR. The output current of 8mA makes it feature maximum design flexibility. A total of 4input lines have been provided.
SN74AHC74DGVR Features
Cut Tape (CT) package
74AHC series
14 pins
SN74AHC74DGVR Applications
There are a lot of Texas Instruments SN74AHC74DGVR Flip Flops applications.
- Matched Rise and Fall
- QML qualified product
- Set-reset capability
- Modulo – n – counter
- ATE
- Power down protection
- Test & Measurement
- Memory
- Count Modes
- Latch-up performance
