SN74AHC74PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC74PWG4 Overview
The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tube package. Differentialis the output configured for it. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. Temperature is set to -40°C~125°C TA. The type of this D latch is D-Type. The FPGA belongs to the 74AHC series. It should not exceed 115MHzin its output frequency. As a result, it consumes 2μA quiescent current. There have been 14 terminations. The 74AHC74 family contains it. A voltage of 3.3V is used to power it. JK flip flop input capacitance is 2pF farads. Electronic devices of this type belong to the AHC/VHC/H/U/Vfamily. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. 2 circuits are used to achieve its superior flexibility. The output current of 8mA makes it feature maximum design flexibility. It has 4lines.
SN74AHC74PWG4 Features
Tube package
74AHC series
14 pins
SN74AHC74PWG4 Applications
There are a lot of Texas Instruments SN74AHC74PWG4 Flip Flops applications.
- Storage Registers
- Data storage
- ESD protection
- Asynchronous counter
- ESCC
- Storage registers
- Patented noise
- Frequency Dividers
- Latch-up performance
- Digital electronics systems
