SN74AHC74PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC74PWRG4 Overview
The item is packaged in 14-TSSOP (0.173, 4.40mm Width)cases. Package Tape & Reel (TR)embeds it. Differentialis the output configured for it. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. A temperature of -40°C~125°C TAis used in the operation. This logic flip flop is classified as type D-Type. It belongs to the 74AHCseries of FPGAs. You should not exceed 115MHzin the output frequency of the device. As a result, it consumes 2μA of quiescent current without being affected by external factors. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74AHC74 family. Power is provided by a 3.3V supply. A JK flip flop with a 2pFfarad input capacitance is used here. The electronic device belongs to the AHC/VHC/H/U/Vfamily. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 14 pins. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this circuit is achieved by using 2 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. The output current of 8mA makes it feature maximum design flexibility. This input has 4lines in it.
SN74AHC74PWRG4 Features
Tape & Reel (TR) package
74AHC series
14 pins
SN74AHC74PWRG4 Applications
There are a lot of Texas Instruments SN74AHC74PWRG4 Flip Flops applications.
- Data Synchronizers
- Common Clocks
- EMI reduction circuitry
- Synchronous counter
- Guaranteed simultaneous switching noise level
- Communications
- Consumer
- Test & Measurement
- Cold spare funcion
- Modulo – n – counter
