SN74AHC74QDRG4Q1
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
SN74AHC74QDRG4Q1 Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. A 2V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the Automotive, AEC-Q100, 74AHCseries contain this type of chip. Its output frequency should not exceed 115MHz Hz. This process consumes 2μA quiescents. The number of terminations is 14. JK flip flop belongs to 74AHC74 family. An input voltage of 3.3Vpowers the D latch. There is 2pF input capacitance for this T flip flop. This D flip flop belongs to the family of AHC/VHC/H/U/V. Electronic part Surface Mountis mounted in the way. 14pins are included in its design. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. 5.5Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. Using 2 circuits, it is highly flexible. As a result of its reliability, this D flip flop is ideally suited for TR. It has 1 output lines to operate.
SN74AHC74QDRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74AHC series
14 pins
SN74AHC74QDRG4Q1 Applications
There are a lot of Texas Instruments SN74AHC74QDRG4Q1 Flip Flops applications.
- Single Up Count-Control Line
- Balanced 24 mA output drivers
- Convert a momentary switch to a toggle switch
- Instrumentation
- Automotive
- High Performance Logic for test systems
- Frequency Dividers
- Modulo – n – counter
- ESD performance
- Communications
