SN74AHC74QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC74QPWRQ1 Overview
14-TSSOP (0.173, 4.40mm Width)is the packaging method. The Tape & Reel (TR)package contains it. T flip flop uses Differentialas the output. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 2V~5.5Vvolts. Temperature is set to -40°C~125°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the Automotive, AEC-Q100, 74AHC series. A frequency of 115MHzshould not be exceeded by its output. As a result, it consumes 2μA quiescent current. 14terminations have occurred. Members of the 74AHC74family make up this object. An input voltage of 3.3Vpowers the D latch. This JK flip flop has a 2pFfarad input capacitance. AHC/VHC/H/U/Vis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be kept above 2V. To achieve this superior flexibility, 2 circuits are used. In view of its reliability, this D flip flop is a good fit for TR. With a current output of 8mA , it offers maximum design flexibility.
SN74AHC74QPWRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74AHC series
14 pins
SN74AHC74QPWRQ1 Applications
There are a lot of Texas Instruments SN74AHC74QPWRQ1 Flip Flops applications.
- ESCC
- Event Detectors
- Load Control
- Functionally equivalent to the MC10/100EL29
- Dynamic threshold performance
- Matched Rise and Fall
- Frequency Divider circuits
- Shift registers
- Storage Registers
- 2 – Bit synchronous counter
