SN74AHCT00MDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT00 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Propagation Delay | 7.9 ns |
| Quiescent Current | 2μA |
| Family | AHCT/VHCT/VT |
| Logic Function | NAND |
| Number of Inputs | 2 |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | NAND Gate |
| Max I(ol) | 0.008 A |
| Max Propagation Delay @ V, Max CL | 7.9ns @ 5V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT00MDREP Overview
Shipping overseas is convenient with the part packed in 14-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It works based on the NAND Gate logic principle. This part needs a voltage of 4.5V~5.5V to function properly. Increasing operating temperature to around -55°C~125°C. There is Surface Mount mounting in Surface Mount. 8mA 8mA output current is 8mA 8mA in the high or low state. The series 74AHCT contains it. In total, there are 14 terminations. Users will benefit significantly from 4 functions in this part. As part of AHCT/VHCT/VT, this chip is used. Try searching with 74AHCT00 to find device variants. Into the part body are injected 14 pins. It is widely used in a variety of applications due to its Surface Mount mounting. Datasheets for 14 pin functions are available upon request. A 2 input is supported by the part. Parts in quiescent state carry 2μA current. The logic device shown here is a typical Gates. It has a capacitance of 50pF when loaded. There is an industry TR method included. According to the datasheet, this part requires 5V power supplies. Device output current is 8mA. In this device, there are 1 outputs. During operation, there are 4 elements. There is a specified operating supply voltage for the chip of 5V volts.
SN74AHCT00MDREP Features
NAND Gate Logic Type
Operating Temperature: -55°C~125°C
AHCT/VHCT/VT Family
Quiescent Current: 2μA
Output Current: 8mA
SN74AHCT00MDREP Applications
There are a lot of Texas Instruments SN74AHCT00MDREP Gates and Inverters applications.
- Electric car
- Photovoltaic grid-connected power system
- Fan
- Communication
- Small ground power station
- Washing machine
- Photovoltaic system
- Air conditioner
- Ship
- MPPT function (maximum power point tracking)
