SN74AHCT123AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT123 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 2 |
| Propagation Delay | 5.3ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 15 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Multivibrator |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Monostable |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.008 A |
| Power Supply Current-Max (ICC) | 0.975mA |
| Schmitt Trigger Input | Yes |
| Number of Data/Clock Inputs | 2 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT123AD Overview
A 16-SOIC (0.154, 3.90mm Width) case holds the product.Multivibrator is advised to pack the equipment in case of Tube.Multivibrator recommended mounting type is Surface Mount.There are two logic types for this part, Logic Type A and Logic Type B.Multivibrator is supplied votage wMultivibratorhin 4.5V~5.5V.Electrical components of this type are included in the 74AHCT series.During the operation of this part, the minimum operating temperature must not exceed -40°C~85°C degrees Celsius.Multivibrator is observed that the current output of 8mA 8mA is low, while the voltage output of 8mA 8mA is high.Based on the 74AHCT123 family, the component is designed.As a result, it has a total of 16 terminations.You can use it with 5V voltage.As well as having 2 inputs for clocks and data, it also has a 2 output.Multivibrator consists of a total of five 16 pins on the part.The product belongs to the family of AHCT/VHCT/VT products.In the part, there are 16 pins that are available for use.Surface Mount mounts the device on the wall.Minimum supply voltage should be greater than 2V.A quiescent current is consumed at 4μA by it.5V volts is the chip's operating supply voltage.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 8mA.Voltage can be delivered at 5V volts by it.There are 2 bits on an IC chip, and they total up to the total amount of bits.There are 2 elements in it.The power supply current is suggested to run under 0.975mA.
SN74AHCT123AD Features
in 16-SOIC (0.154, 3.90mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74AHCT
based on 74AHCT123
Supply Voltage: 5V
Quiescent Current at 4μA
output current at 8mA
2 bits
SN74AHCT123AD Applications
There are a lot of Texas Instruments SN74AHCT123AD applications of multivibrators.
- Envelope detection
- Timing clrcults
- Server PSU
- Time-delay applications
- Puls delay and timing
- Network Attached Storage (NAS)
- Video Analytics Servers
- Mobile Internet Devices
- Desktop PCs or Notebook PCs
- Digital Radio and Internet Radio Players
