SN74AHCT123ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT123 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 2 |
| Propagation Delay | 5.3ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 15 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Multivibrator |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Monostable |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.008 A |
| Power Supply Current-Max (ICC) | 0.975mA |
| Schmitt Trigger Input | Yes |
| Number of Data/Clock Inputs | 2 |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT123ADBR Overview
The product is packaged in a 16-SSOP (0.209, 5.30mm Width) case.The equipment should be packed in case of Cut Tape (CT), so that it can be used in an emergency.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.Part Monostable includes logic type Monostable.Votage is supplied within a period of time called 4.5V~5.5V.Multivibrator is one of the electrical components that is included in the 74AHCT series.Multivibrator is not permMultivibratorted to operate this part below -40°C~85°C°F.The output of 8mA 8mA is low in terms of current while it is high in terms of voltage.Multivibrator is designed on the basis of the 74AHCT123 family of components.There are a total of 16 terminations.5V voltage can be handled by it.Data and clock inputs are provided through 2 inputs.There are a total of ten 16 pins on the part.The product belongs to the family of AHCT/VHCT/VT products.In this part, you can find 16 pins.Multivibrator is mounted by Surface Mount.Supply voltages must be higher than 2V to meet the minimum requirement.As 4μA increases, it consumes more quiescent current.Specifically, 5V volts are the operating supply voltage.A device can be supplied with a current of output named 8mA if the output voltage is set appropriately.The voltage that it can output can be as high as 5V volts.IC chips have 2 bits total.The power supply current is suggested to run under 0.975mA.Packaging is handled by TR.On the device, there is a 2 circuit that can be used.
SN74AHCT123ADBR Features
in 16-SSOP (0.209, 5.30mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74AHCT
based on 74AHCT123
Supply Voltage: 5V
Quiescent Current at 4μA
output current at 8mA
2 bits
SN74AHCT123ADBR Applications
There are a lot of Texas Instruments SN74AHCT123ADBR applications of multivibrators.
- Pulse shaping
- Frequency division
- Time-delay applications
- Server PSU
- Video Analytics Servers
- Puls delay and timing
- Embedded PCs
- Blu-ray Players and Home Theaters
- Frequency discriminators
- Envelope detection
