SN74AHCT123ADR
| Parameters | |
|---|---|
| Schmitt Trigger Input | Yes |
| Number of Data/Clock Inputs | 2 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT123 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 2 |
| Propagation Delay | 5.3ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 15 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Multivibrator |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Monostable |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.008 A |
| Power Supply Current-Max (ICC) | 0.975mA |
SN74AHCT123ADR Overview
The product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Keeping equipment packed in case of Cut Tape (CT) is a good idea.The recommended mounting type is Surface Mount.The logic type of the part includes Monostable.Multivibrator is supplied votage wMultivibratorhin 4.5V~5.5V.There is an electrical component included in the 74AHCT series.Unless otherwise specified, this part must operate at no lower than -40°C~85°C degrees Celsius.A low current is output from the device 8mA 8mA, whereas a high voltage output is output from the device 8mA 8mA.A component based on the 74AHCT123 family is designed.The total number of terminations is 16.Voltages in the 5V range can be handled.A data or clock input can be connected to it through the 2 input.The part has a total of 16 pins.A member of the AHCT/VHCT/VT family, it has a number of characteristics.There are 16 pins available in the part.As shown in the picture, Surface Mount is mounting the device.The minimum supply voltage must be greater than 2V if the supply voltage is to exceed 2V.4μA consumes quiescent current.The operating supply voltage for the chip is specified as 5V volts.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 8mA.Using it, you can get voltage at 5V volts.IC chips have 2 bits total.Using 0.975mA is recommended for power supply current.Designed and packaged by TR.On the device, there is a 2 circuit that can be used.
SN74AHCT123ADR Features
in 16-SOIC (0.154, 3.90mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74AHCT
based on 74AHCT123
Supply Voltage: 5V
Quiescent Current at 4μA
output current at 8mA
2 bits
SN74AHCT123ADR Applications
There are a lot of Texas Instruments SN74AHCT123ADR applications of multivibrators.
- Frequency division
- Puls delay and timing
- Desktop PCs or Notebook PCs
- Time-delay applications
- Digital Radio and Internet Radio Players
- AV Receivers
- Personal Digital Assistant (PDA)
- Video Analytics Servers
- Astable multivibrator
- Timing clrcults
